What is the reason for the insufficient power of the generator set analyzed by the generator manufacturer?

2021-09-14 打印
qq
Due to the insufficient compound excitation compensation of the voltage source of the excitation device, it can not provide the excitation current required for armature reaction, so that the terminal voltage of the generator set is lower than the grid voltage and can not send the rated reactive power. Some measures should be taken. It is hoped that the introduction of the generator manufacturer can bring reference and help to the user.

1. A three-phase voltage regulator is connected between the generator and the excitation reactor to increase the generator terminal voltage and gradually increase the magnetic potential of the excitation device;

2. Change the phase between the voltage magnetic flux potential of the excitation device and the voltage at the generator end to increase the synthetic total magnetic flux potential. Thousands of ohms and 10W resistance can be connected in parallel at both ends of each phase winding of the reactor;

3. Reduce the resistance of the rheostat to increase the excitation current of the generator.

During generator maintenance, the following reasons may cause insufficient power of diesel generator set:

1. Insufficient oil inlet of diesel engine;

2. Diesel fuel injection pump failure;

3. The filter element of generator set is blocked;

4. The valve of diesel engine is not closed tightly;

5. Poor atomization of diesel fuel injection nozzle;

6. The piston ring and cylinder liner of the generator set are worn.

Insufficient output power of generator set is generally power failure. Generally, this situation will not occur in the generator part. The common fault of the unit is the failure of voltage establishment when there is no voltage, high voltage, bottom voltage and a certain amount of load.