What you don
2021-10-05
During the operation of the generator set, the coolant in the cooling water tank is usually very hot and under pressure. Therefore, it is strictly prohibited to clean the radiator or remove the pipes when it is not cooled, and do not operate the radiator or open the fan protective cover when the fan is rotating.
Corrosion is the main cause of radiator failure. It is suggested that the pipe joint should be checked frequently to prevent leakage, and the water tank should be filled regularly to drain the air in the system. The cooling water tank should not be in the condition of partial water injection and discharge, because this often accelerates the corrosion process. For the generator set that does not work, the water tank shall be completely evacuated or filled. If conditions permit, it is best to use distilled water or natural soft water and add an appropriate amount of antirust agent.
One problem is the cleaning of the water tank. Water tank cleaning is divided into external cleaning and internal cleaning. This is a very important link, which will directly affect the use effect of the radiator, and then affect the use of the whole generator set.
For the generator set working in the open air, the gap of its radiator may be blocked by debris, insects and other sundries. You can often spray with low-pressure hot water (add detergent appropriately), and pay attention to spraying steam or water from the front of the radiator to the fan. When spraying, cover the diesel engine and alternator with cloth. If the sediment is difficult to remove, remove the radiator and soak it in hot alkaline water for about 20 minutes, and then rinse it with hot water.
Corrosion is the main cause of radiator failure. It is suggested that the pipe joint should be checked frequently to prevent leakage, and the water tank should be filled regularly to drain the air in the system. The cooling water tank should not be in the condition of partial water injection and discharge, because this often accelerates the corrosion process. For the generator set that does not work, the water tank shall be completely evacuated or filled. If conditions permit, it is best to use distilled water or natural soft water and add an appropriate amount of antirust agent.
One problem is the cleaning of the water tank. Water tank cleaning is divided into external cleaning and internal cleaning. This is a very important link, which will directly affect the use effect of the radiator, and then affect the use of the whole generator set.
For the generator set working in the open air, the gap of its radiator may be blocked by debris, insects and other sundries. You can often spray with low-pressure hot water (add detergent appropriately), and pay attention to spraying steam or water from the front of the radiator to the fan. When spraying, cover the diesel engine and alternator with cloth. If the sediment is difficult to remove, remove the radiator and soak it in hot alkaline water for about 20 minutes, and then rinse it with hot water.