Necessary inspection items during operation of diesel generator set
2022-07-19
Many people think that the generator set can be put into use safely after there is no problem in the pre use inspection, and there is no need to check or check frequently in the process of use. In fact, this is a misunderstanding of everyone's operation. For power generation equipment, attention should be paid to the inspection of multiple items throughout the whole operation process.
1. Check the indicating instruments of the diesel generator according to the specified time, and pay attention to whether the pressure and water temperature of the lubricating oil change. The pressure of lubricating oil shall not be lower than 150kPa, and the temperature of cooling water shall not be higher than 95 ℃.
2. Check the crankcase oil level, fuel tank oil level and radiator water level of the diesel generator. If it is lower than the normal position, it should be supplemented.
3. Frequently observe whether the instruments and alarm indicators of the diesel generator distribution panel are normal. Where the red light is on, it means there is a fault, and the green light is the normal operation indicator.
4. Check whether the charger is charged normally.
5. Listen to whether the operation sound of each part of the unit is normal.
6. Feel whether the temperature of the hand mold body shell, bearing shell, oil pipe and water pipe is normal.
7. Pay attention to whether the diesel generator or electrical equipment has burnt odor.
8. If any bad situation is found, it should be handled immediately; If it is serious, stop the machine for treatment.
9. In case of fault shutdown, the fault must be eliminated, and then the diesel generator can be operated again by pressing the repeated handle on the diesel generator.
10. Each operation parameter shall be recorded at least twice per shift.
During the operation of the diesel generator set, it is not only necessary to check carefully step by step, but also to check and record frequently, so as to find the bad conditions of the unit in time. Only by thoroughly following the inspection steps before, during and after operation can the safe operation of the diesel generator be guaranteed to the greatest extent.
1. Check the indicating instruments of the diesel generator according to the specified time, and pay attention to whether the pressure and water temperature of the lubricating oil change. The pressure of lubricating oil shall not be lower than 150kPa, and the temperature of cooling water shall not be higher than 95 ℃.
2. Check the crankcase oil level, fuel tank oil level and radiator water level of the diesel generator. If it is lower than the normal position, it should be supplemented.
3. Frequently observe whether the instruments and alarm indicators of the diesel generator distribution panel are normal. Where the red light is on, it means there is a fault, and the green light is the normal operation indicator.
4. Check whether the charger is charged normally.
5. Listen to whether the operation sound of each part of the unit is normal.
6. Feel whether the temperature of the hand mold body shell, bearing shell, oil pipe and water pipe is normal.
7. Pay attention to whether the diesel generator or electrical equipment has burnt odor.
8. If any bad situation is found, it should be handled immediately; If it is serious, stop the machine for treatment.
9. In case of fault shutdown, the fault must be eliminated, and then the diesel generator can be operated again by pressing the repeated handle on the diesel generator.
10. Each operation parameter shall be recorded at least twice per shift.
During the operation of the diesel generator set, it is not only necessary to check carefully step by step, but also to check and record frequently, so as to find the bad conditions of the unit in time. Only by thoroughly following the inspection steps before, during and after operation can the safe operation of the diesel generator be guaranteed to the greatest extent.